1300 300 340

© CISTECH SOLUTIONS

GV1-2010

Single Port Radio over IP (RoIP) Gateway for Mission

Critical Operations

The CISTECH Solutions Radio over IP (RoIP) gateway is a ruggedised portable radio gateway that provides a single Land Mobile Radio (LMR) port to connect voice radios to IP networks. The rugged, compact form factor of the GV1 is ideally suited for mission-critical voice communications over IP networks in fixed and mobile roles.


The gateway features connections for one radio, as well as military H-250 handsets. Additionally, network connectivity is through one of two Ethernet ports configured as a 2 port switch. GV1 serves as a data and voice communications hub in mobile or fixed deployments with harsh environments.


Using high-grade components, conduction cooling and extended operating temperature range, the GV1 is optimised for operation in harsh environments that require TCP/IP, VoiP and analogue Voice integration.

The GV1-2010 is a core component of our Integrated Serverless Voice Solution, and whether you're after a single radio network being integrated into an IP system, or multiple radios being integrated for interoperability, the low power and rugged nature of the GV1-2010 ensures that your mission is a success.

SPECIFICATIONS

CASE

  • 34.3 x 73.8 x 115.4mm (H x W x D)

  • Weight 390g, 420g with dust covers

  • Input Voltage 10-48V DC, 802.3af POE

  • Power < 3 Watts

  • Ambient Temperature Designed to -40 to +85°C

  • Temperature Monitor -40 to +85°C

INPUTS/OUTPUTS

  • CODECs

    • G.711, G.726, G729

    • Linear PCM, ILBC, DVI4

    • Speex, SILK

  • Ethernet

    • 10/100/1000 BaseT

    • 802.3af POE (ETH1 Only)

LMR PORT

  • 4 Wire E&M 600 Ohm

  • Duplex

    • Full/Half

  • Radio PTT Trigger Options:

    • Packet/Voice

  • PTT Signal Support (Optically Coupled)

    • Relay Isolated (Close Circuit)

  • COR Signal Support (Optically Coupled)

    • Close Circuit

    • DC Switched

    • VAD

  • Audio Level Management

    • AGC

    • Configurable input gain (dB)

    • Configurable output gain (dB)

  • Audio Input Range ( Transformer Coupled)

    • -60 to +0 dBm (600 Ohm)

  • Audio Output Range (Transformer Coupled)

    • -60 to +0 dBm (600 Ohm)

  • SIP Channel Connection Options

    • Call on load

    • Call on activity

INTERFACES AND MANAGEMENT

IP RTP CHANNEL OPTIONS

  • RTP Channel Support

    • Multicast

    • Unicast

    • SIP

  • RTP Channel Options

    • QoS

    • Codec

    • RTP

    • Payload size

  • QTY 2 10/100/1000 Ethernet switch ports

  • QTY 1 Land Mobile Radio port

  • QTY 1 Handset port

  • QTY 1 Serial Console

  • Central or Local Management

    • Web

    • Telnet (Base Configuration)

    • Serial (Base Configuration)

IP CONFIGURATION

  • IP Address allocation

    • Static/Dynamic

  • Network Monitoring Support

    • SNMP V2

  • Network Time Protocol Support

    • SNTP

  • Adjustable MTU Support (VPN)

CODECs INCLUDING

  • G.711, G729, ILBC, Speex, SILK,
    OPUS, AMR-NB

  • Dynamic Payload Mapping

HANDSET PORT

  • H250 Handset Support

  • PTT

  • Sidetone

  • Volume Controls

  • Switched DC handset ouput power on pin F

  • Talkgroup Selection

INDICATORS

  • Handset PTT

  • Network Activity

  • Radio Port PTT/COR

  • Blackout Mode

ENVIRONMENTAL TESTING

  • High and Low Temperature: MIL-STD-810G, Method 501.5 and 502.5. +80C to -40 (Operational & Storage)

  • Humidity: MIL-STD-810G, Method 507.5. 31C-41C. 59% to 89% RH. 15 Cycles.

  • Vibration: MIL-STD-810G, Method 514.6.

    • Category 4: Truck/Trailer (Secured Cargo)

    • Category 7: Aircraft – Jet (C-17)

    • Category 21: Watercraft – marine vehicle

  • Shock: MIL-STD-810G, Method 516.6.

    • Procedure I – Functional shock

    • Procedure IV – Transit Drop

  • IP67: IEC 60529 (Dust. Water: 1m for 30 minutes)

  • Altitude: MIL-STD-810G, Method 500.5 – Procedure 8. 50,000 feet – one hour.